Showing posts with label IIBM MBA EXAMINATION ANSWER SHEETS. Show all posts
Showing posts with label IIBM MBA EXAMINATION ANSWER SHEETS. Show all posts

Sunday, 6 June 2021

PRODUCTION MANAGEMENT IIBM MBA EXAMINATION ANSWER SHEETS PROVIDED WHATSAPP OR TELEGRAM IN 9924764558



PRODUCTION MANAGEMENT IIBM MBA EXAMINATION ANSWER SHEETS PROVIDED WHATSAPP OR TELEGRAM IN 9924764558

CONTACT

DR. PRASANTH BE MBA PH.D. MOBILE / WHATSAPP: +91 9924764558 OR +91 9447965521 EMAIL: prasanththampi1975@gmail.com WEBSITE: www.casestudyandprojectreports.com

 Examination Paper of Production Management


IIBM Institute of Business Management

IIBM Institute of Business Management

Examination Paper MM.100

Product Design & Development

Section A: Objective Type & Short Questions (30 Marks)

 This section consists of Multiple Choice & Short Answer type questions.

 Answer all the questions.

 Part One carries 1 mark each & Part Two carries 5 marks each.

Part One:

Multiple Choices:

1. The concept of a contract book is detailed by

a. Wheelwright

b. Clark

c. Both (a) & (b)

d. None of the above

2. BOM stands for Bill of Materials.(T/F)

3. Concept screening is based on a method developed by the late Stuart Pugh in the 1980s and is often

called ______________

4. _____________ is used when increased resolution will better differentiate among company concepts.

5. ________________are the first products produced by the entire production process.

6. The first commercial free-form fabrication system was introduced by 3D Systems.

a. 1984

b. 1986

c. 1964

d. 1948

7. Concepts are turned over the customer, client, or some other external entity for selection is called

a. Intuition

b. Pros and Cons

c. External decision

d. Decision materials

8. A Russian problem-solving methodology called TRIZ began to be disseminated in Europe and in the

United States in the

a. 1998

b. 1997

c. 1976

d. 1990

Examination Paper of Production Management

2

IIBM Institute of Business Management

9. Functional elements of a Product Architecture are ___________& _____________

10. ______________ is a key determinant of the economic success of a product.

Part Two:

1. What is “Control Drawings”.

2. Write short note on “Resource Allocation”.

3. Write short note on “Product Variety”.

4. What is “Project Risk Plan”

Section B: Caselets (40 marks)

 This section consists of Caselets.

 Answer all the questions.

 Each caselet carries 20 marks.

 Detailed information should form the part of your answer (Word limit 200 to 250 words).

Caselet 1

New Product Development At Smart India Ltd.

Ajay Kumar, the Vice-President, (Sales) of a leading Delhi based bicycle manufacturer of the country

called SMART LTD., was wondering at the increase in the quantum of Traffic on roads during the last 10

years, while glancing outside his office window. But not much had changed in his company in th23e year

2001. His company‟s market share was dwindling since the last 10 years, though the profits and sales

were showing an increasing trend. The threat of cheap imports was also knocking at the doors. The

competitors were using marketing strategies to the hilt in order to get larger chunk of market share. The

things were not showing improving trend despite the continuous efforts by the company. SMART LTD.

was equally poised with RUSH LTD. in respect of market share just 10 years back. Now the ground

realties were very much adverse to SMART LTD.. While RUSH LTD. was having a market share of

about 45 per cent, SMART LTD. lagged behind with only about half i.e. 23 percent closely followed by

CLIMB LTD. with 20 per cent. The rapid erosion in the market share of SMART LTD. was of concern to

Ajay Kumar, who was trying to find out ways to stop the downfall. The problem of losing market share

had become more prominent keeping in view that the bicycle business was a volume led business to an

extent. To make the matters worse, the credit rating agency had downgraded the debt instrument issued by

the company in view of a possible feud between the family members of the promoter and the majority

share holders.

An important factor in the bicycle market, which had recently gained importance, was the increasing

demand for different types of bicycles among youth, particularly those of the sports variety. Unlike in the

END OF SECTION A

Examination Paper of Production Management

3

IIBM Institute of Business Management

past, improved technology had led to newer varieties of bicycle ranging from the very basic to the 21 gear

models. Such value added products also provide better profit margins. Also, some manufacturers had

started rolling out products provide better profit margins. Also, some manufacturers had started rolling

out products that were not strictly bicycles but had similar technological inputs. These included exercise

bicycles popularly found in the clubs and gymnasiums. At the plant level, the top post was that of the

Joint President and was held by one of the family members. Most of the decisions were subject to the gut

feel of the Joint President.

Though perceived as „a poor man‟s product‟, the scenario was changing of late. Earlier the product was

positioned using only one plank i.e., cost effective transport utility vehicle. Now the market was being

segmented multidimensionally by all the players. Age, benefit, income, occasions etc. were the added

criteria. SMART LTD. had come up with bikes for kids, city bikes, mountain bikes and classics. This

reflected the changing needs of buyers as well. CLIMB LTD. had segmented market on the basis of

usage, road bikes, mountain bikes and tandems. SMART LTD. had also jumped to the bandwagon

recently and had introduced bikes in ladies, kids, adventure and health segments. The trend was to

increasingly use the platform of health, fun, sports etc., to increase the penetration into the market. Once

the leader in the bicycle industry had 35 models in the market with about eight colour variants for each.

The competitor RUSH LTD. had about 45 models in the market with more colour variants.

The financial stakes of introducing of a new product in the bicycle industry ranged from Rs 45000 to

a couple of lakhs. The manufacturing process of bicycle was composed of many sub-assemblies. The

synergic use of these sub-assemblies helped in reaping economies of scale. To remain to the competition,

it was imperative to introduce innovative products that could meet the differentiated needs in a better

fashion. Ajay Kumar, the Vice President (Sales) had seen a bike in a foreign magazine and had sent the

picture of the same 6 months back to design and development department. The feasibility report was still

awaited from the design and development department. He appraised the Vice-President (Production)

regarding the issue but the things still had to be sorted out. Ghanshyam, the HOD(Sales Department) had

visited Taiwan and brought designs of four bicycles which could be manufactured by the company. But

his sales division suggested that those bikes would be out of reach for the poor, therefor, the idea could

not be taken up. He was very enthusiastic over a project to launch a new bike for fun loving people. After

detailed deliberations with the production and design development department for about 8 months, the

proposal was sent to the top management for approval. He was sad, as the file was pending for about 2

months with his boss. While Ajay Kumar was pondering over the issues, his colleague from the finance

department entered into the room and said, “I was watching a movie on HBO last night, I saw a very

different kind of bike in it. Did you view it?” Ajay Kumar replied in negative and wondered what could

be the right approach for product development. He was also concerned with the time involved in the

process of development of new products.

Ajay while passing by the market simply gazed at the bicycle showroom on his way and appreciated

the speed at which the competitors were able to come up with various colour variants. Recently, Ajay

Kumar also discussed with the Vice-President (Production) regarding the experimentation with some new

colours. The officer agreed with his new proposal and assured that the same shall be forwarded to the top

management for a final decision. Ajay kumar prepared himself to wait for a long time as his experience

curve suggested. One of the only solacing fact for Ajay Kumar was the success of the bike „football‟

which they launched on the eve of soccer world cup. The bike was an instant success. A friend of Ajay

Kumar, who worked with him till last year, called upon him. He remembered how enthusiastically he was

explaining his new challenging job. He was very happy about the confidence the management had put in

him. He was also being sent abroad on training by his new employers. The sales department had

subjectively come up with the multdimensional mapping of the three major players on two relevant

attributes.

The company planned to come up with a new campaign focusing upon the environment friendliness

of bicycle over motor bikes that use fossil fuels. The government also promised to aid the concern in this

effort. One of the main strengths of SMART LTD. was its undisputed leadership in the rural areas. The

company did not intend to lose it. His main rival was also closing in for the rural market. SMART LTD.

Examination Paper of Production Management

4

IIBM Institute of Business Management

had initiated a restructuring exercise in 1999-2000, whereby, three new wholly owned subsidiaries were

created, each being named after the respective cycle manufacturing locations, namely, SMART LTD.

(Delhi), SMART LTD. (Gujarat) and SMART LTD. (Andhra Pradesh). Although the originally stated

intention of setting up these subsidiaries was to treat them as profit centers, current developments indicate

the likelihood of distribution of assets and liabilities into these companies.

Ajay Kumar was quite confident of the quality of the bicycles manufactured as the steel used for the

sale was produced by one of its own unit. The firm had also bagged an international award for its quality

standards. The sales figures had gone up from 250 crores in the year 1995 to 350 crores in the year 1998.

The inflow of foreign exchange showed a steady increase from 100 to 120 during the same period.

SMART LTD. was exporting bikes to more than 35 countries.

Questions:

1. How new product development process be improved at SMART LTD?

2. What strategies should be used by SMART LTD. to increase its market share.

Caselet 2

Swastik Cycles Limited

Swastik Cycles Limited was a key manufacturer of a wide variety of cycles. Its products were available

almost all over the country and were also exported. It was the second largest bicycles selling organisation

followed by Star Cycles. The total turnover of the company was Rs 400 crores during the year 1999-2000

and its market share in the year 2000-2001 was about 24%, whereas Star Cycle had captured about 46%

of the total market in the same year, rest of the market was shared by all other brands. The company had

classified its entire products into.

1. Utility segment: popularly called as the standard cycles, widely used by milkmen, hawkers, and other

lower income group people.

2. Fancy cycles: multi coloured bicycles with modern features like gear changing, stylish handle, slim

frame etc., used by kids, teenagers and sportsmen.

3. Health segment: health maintaining products i.e., walker, cycle etc., for all age group had been put

under this categorys.

The company had its strength in the utility segment and was accepted as the market leader, whereas in

other segments, it had yet to prove itself. In other segments i.e., fancy cycle segment, health segment the

Star Cycle was far ahead. The company was striving to fight the stiff competition from domestic players.

It also anticipated the competition from Chinese players who were expected to enter the Indian market

with low cost products. On account of heavy import duties levied by the government in the budget of

2001-2002, the chances of their invading the domestic market were, however, substantially minimized.

Now, the company had confined itself to win over the domestic players in these segments. The major

issue for a company was that despite their presence in the fancy cycles the segment for last 10 years they

were not able to attract the target market and the sales were lagging behind. The immediate requirement

was to push the sales of these two segments.

The company had been trying to push sales through their dealers network all over the country which

was the only intermediatory between the company and the customers. In order to fresh the desired sales

company had the policy of offering monetary and non-monetary incentives in the form of rebates on

target lifting.

In addition to it, the company also offered incentives like foreign trips to Bangkok etc. and free passes

of mega events. The company also went for some other sales promotion activities the like point of

Examination Paper of Production Management

5

IIBM Institute of Business Management

purchase (POP), joint promotion schemes (JPS) with dealers, in which the dealers offered gifts on every

purchase to their customers and the cost incurred was born jointly by the company and the dealer

concerned. Cycle races organised by schools and educational institutes were other promotional measures

adopted by the company.

The company had invested marginally in advertising. They ran the show through print media and the

advertisement on the electronic media was very low. Decision making regarding promotional activities

was centralized with the corporate office, whereas, other decisions regarding sales, R&D and production

could be taken by the respective units. The field force comprising of sales executives and field officers

who were in constant touch with the dealers and the customers for getting their feedbacks regarding sales

promotion strategies, used to send the feedbacks to the corporate office for further processing and

decision making. This consumed time and little was left with the particular unit to decide.

The changing trends in the markets gave enough scope to make the bicycle popular amongst the elite

class in the form of health maintaining products, pollution free vehicles etc. Though the company was

making efforts to tap this newly emerging customer group by offering them health maintaining cycles,

stylish racing cycles, yet it was a hard task for the company because it had not made any strategy to reach

the customers directly to bring about awareness of the products. To improve its market share and

maximize sales, a lot was required to be done by the company to devise the marketing strategies if it was

to cope up with the changed market scenario and the strategies adopted by its competitors.

Questions:

1. Discuss key problem faced by Swastik Cycles?

2. Design an appropriate marketing strategy comprising of all the essentials to overcome this problem.

Section C: Applied Theory (30 marks)

 This section consists of Long Questions.

 Answer all the questions.

 Each question carries 15 marks.

 Detailed information should form the part of your answer (Word limit 150 to 200 words).

1. Many product development teams separate the “looks like” prototype from the “works like”

prototype. They do this because integrating both function and from is difficult in the early phase of

development. What are the strengths and weaknesses of this approach? For what types of products

might this approach be dangerous?

2. The argument for the motorcycle architecture is that it allows for a lighter motorcycle than the more

modular alternative. What are the other advantages and disadvantages? Which approach is likely to

cost less to manufacture?

END OF SECTION B

END OF SECTION C

Examination Paper of Production Management

6

IIBM Institute of Business Management

IIBM Institute of Business Management

Examination Paper MM.100

Quantitative Techniques

Section A: Objective Type & Short Questions (30 Marks)

 This section consists of Multiple Choice questions & Short Answer type questions.

 Answer all the questions.

 Part One carries 0.5 mark each & Part Two carries 5 marks each.

Part One:

Multiple Choices:

1. The value of 3n+4 - 6.3n+1 is

a. 27.3n+1

b. 21.3n-1

c. 21.3n+1

d. 27.3n-1

e. 21.3-n-1

2. The value of x which satisfies the question x/2-x/4=x-9 is

a. 12

b. 14

c. 16

d. 18

e. 20

3. The sum of 5ax-7by+cz and ax+2by-cz is

a. 6ax+5by

b. 6ax-5by

c. 6ax+5by-2cz

d. 6ax-5by-cz

e. 6ax-5by+2cz.

4. The product of 3x-5 and 2x+7 is

a. 6x2-11x-35

b. 6x2-11x+35

c. 6x2+11x-35

d. 6x2 +10x-35

e. 6x2+11x+35

5. The 37th term in the series -2.8, 0, 2.8,…. Is

a. 98

b. 89

c. 87

d. 78

e. 68

Examination Paper of Production Management

7

IIBM Institute of Business Management

6. The sum of the series 14, 64, 114, … to 20 terms is

a. 7890

b. 8970

c. 9780

d. 10820

e. 10920

7. The last term in the series 2, 4, 8, … to 9 terms is

a. 612

b. 512

c. 412

d. 312

e. 212

8. If an unbiased coin is tossed 3 times then the probability that at least one head occurs is

a. 0.875

b. 0.5

c. 0.375

d. 0.125

e. 0.1.

9. Again in continuation with the above question the probability that 3 heads result is

a. 0.100

b. 0.125

c. 0.250

d. 0.500

e. 0.875

10. The line y=5-10x cuts the y axis at_________ and has slope________

a. (0,10), -5

b. (0,-10), 5

c. (0,5), -10

d. (0,-5), 10

e. (0,5), 10

11. If y=F(x) is the equation of a line then the slope at (5,2) is given by

a. F‟(2)

b. F‟(5)

c. F(2)

d. F(5)

e. None of the above

12. Slope of the line passing through the points (4,4) and (5,5) is

a. 1

b. 9

c. 1/9

d. 20

e. 1/20

13. An „Ogive‟ is

a. A graph of ungrouped data

Examination Paper of Production Management

8

IIBM Institute of Business Management

b. A graph of grouped data

c. A graph of cumulative frequencies

d. A graph of ranges of fractiles

e. A graph with rectangles as opposed to a line graph.

14. If p=3x4 + 9xy + y3 then ∂p/∂y is given by

a. 12x3+9x

b. 12x3+9x+3y2

c. 9x+3y2

d. 9y+3y3

e. 12x3+9y+3y2

15. For a function f(x), f‟(x)=0 at x=a then „a‟ is a point of minima if

a. F(a)<0

b. F(a)=0

c. F‟‟(a)=0

d. F‟‟(a)< 0

e. F‟‟(a)>0

16. The function 2x2 + 3x +2 has a

a. Maximum value at x = - 3/4

b. Minimum value at x = - 2

c. Maximum value at x = -3/2

d. Minimum value at x = -3/4

e. The equation has no maxima and minima.

17. The probability of getting exactly 3 heads in four tosses of a fair coin is

a. 1/2

b. 1/4

c. 1/8

d. 1/10

e. 1/16

18. In multiple regression, the number of normal equations will be

a. Two

b. Three

c. One

d. More than three

e. More than or equal to three

19. The index of industrial production is an example of

a. Price index

b. Value index

c. Quality index

d. Relative index

e. Industrial production index

20. As the sample size is increased, the standard error of the mean would

a. Increase

b. Decrease

c. Remain unchanged

Examination Paper of Production Management

9

IIBM Institute of Business Management

d. May or may not increase

e. The value of sample mean would be lot closer of population mean

Part Two:

1. What do you understand by „Infeasibility‟ of the solution?

2. Write about „Big – M‟ method for minimization.

3. Write about the „Classical Economic Order Quantity (EOQ) models.

4. Write a short note on „Interfering Float‟.

Section B: Practical Problems (40 marks)

 This section consists of Practical Problems.

 Answer all the questions.

 Each Practical Problems carries 20 marks.

1. A car retailer thinks that a 40,000 mile claim for tire life by the manufacturer is too high. She

carefully records the mileage obtained from a sample of 64 such tires. The mean turns out to be

38,500 miles. The standard deviation of the life of all tires of this type has previously been

calculated by the manufacturer to be 7,600 miles. Assuming that the mileage is normally

distributed, determine the largest significance level at which we should accept the manufacturer‟s

mileage claim, that is, at which we would not conclude the mileage is significantly less than

40,000 miles.

2. Consider the following data:

Output Total Cost

(in lakhs of units) (in lakhs of rupees)

5 140

7 155

9 170

11 180

14 200

17 230

20 240

22 260

24 275

28 310

Identify the fixed and variable cost components using the least squares method.

END OF SECTION A

Examination Paper of Production Management

10

IIBM Institute of Business Management

Section C: Applied Theory (30 marks)

 This section consists of Long Questions.

 Answer all the questions.

 Each question carries 15 marks.

 Detailed information should form the part of your answer (Word limit 150 to 200 words).

1. In a recent survey, senior company executives in five metros has ranked two former finance ministers

Mr. Manmohan Singh and Mr. P. Chindambaram as first and second and the present finance minister

Mr. Yashwant Sinha in third position as regarding their popularity.In this, an example of sampling

survey? Discuss about necessity of sampling and the different methods of sampling?

2. “Index numbers are an indispensible tool in day to day life. Comment. Also, explain with examples

how index numbers provide a summary measurement of movements of a large number of economic

variables. Is there a possibility that, their method of computation could give a distorted picture of

reality?

S-2-300813

END OF SECTION B

END OF SECTION C

Thursday, 18 March 2021

Examination Paper of Project Management - IIBM MBA EXAMINATION ANSWER SHEETS WHATSAPP 91 9924764558

 Examination Paper of Project Management -  IIBM MBA EXAMINATION ANSWER SHEETS WHATSAPP 91 9924764558

CONTACT

DR. PRASANTH BE MBA PH.D. MOBILE / WHATSAPP: +91 9924764558 OR +91 9447965521 EMAIL: prasanththampi1975@gmail.com WEBSITE: www.casestudyandprojectreports.com


Examination Paper of Project Management


IIBM Institute of Business Management

IIBM Institute of Business Management

Examination Paper MM. 100

Strategic Cost Management

Section A: Objective Type & Short Questions (30 Marks)

 This section consists of Multiple Choi ce & Short Notes questions.

 Answer all the questions.

 Part one carries 1 mark each & Part Two carries 5 marks each.

Part One:

Multiple Choices:

1. A set of policies, procedures and approaches that helps a firm attain and retain success for

long is termed as a)

Benchmarking

b) Life cycle costing

c) Target costing

d) Strategy

2. A cost management tool that bring in its focus the activities performed to produced a product

is called a)

Target costing

b) Life cycle costing

c) ABC

d) Benchmarking

3. Cost incurred to the past that are not relevant to present decisions are a)

Fixed cost

b) Sunk cost

c) Opportunity cost

d) Indirect costs

4. In a process costing system, when items are sold, the cost of the item are moved from a)

Work-in-progress to finished goods

b) Work-in-progress to Cost of goods sold

c) Cost of goods sold to finished good

d) Finished goods to cost of goods sold

5. Differential costs are sometimes referred to as a)

Incremental costs

b) Relevant costs

c) Avoidable costs

d) Both a& b

6. Customer service feature does not include a)

Warranty and repair service

b) Adherence to specifications

Examination Paper of Project Management

2

IIBM Institute of Business Management

c) On-time delivery

d) Follow-up with customer after the sale.

7. Product cost are function ofa)

Product design

b) Specific customers

c) Customer characteristics

d) Market segments

8. The company‟s overall sales performance is influenced by factors such as a)

Sales volume

b) Sales Mix

c) Market size and share

d) All of the above

9. Customer life cycle cost includes a)

Purchases price

b) Start-up costs

c) Post-purchase cost

d) All of the above

10. Which stage of product life cycle is characterized by little competition and slowly increasing

sales?

a) Introduction

b) Growth

c) Maturity

d) Decline

Part Two:

1. List the characteristics of Balance score card.

2. What are the methods of Alternative costing?

3. Differentiate between fixed cost and variable cost.

4. Discuss the dissimilarities between job order costing & process costing systems.

END OF SECTION A

Section B: Caselets (40 Marks)

 This section consists of Caselets.

 Answer all the questions.

 Each caselet carries 20 marks.

 Detailed information should form the part of your answer (Word limit 150 to 200 word)

Caselet 1

Examination Paper of Project Management

3

IIBM Institute of Business Management

Vikram Ahuja was hired as assistant cost controller of chemfert Ltd., a multinational firm that

processed chemical for use in fertilizers. Soon Vikram learned that the nearby residential landfill

was being used to dump toxic wastes. It appeared that some members of management team were

aware of this situation and may have been involved in arranging for this dumping. uncertain, how

he should approach, Vikram is contemplating several alternatives courses of action , like seeking

the advice of the superior, the controller or anonymously releasing the information in the national

daily or discussing with an outside member of the BOD‟s

Questions:

1. Discuss why Vikram has an ethical responsibility to take some action against the MNC.

2. Which of the alternative courses would be the most appropriate in the given situation?

Caselet 2

A brilliant university is located in Mumbai. The university has four deportments- Business,

humanities, fine arts and engineering. The university is headed by a president who has five

presidents reporting to him, each heading auxiliary services, admission and records, academics.

Financial services and maintenance. In addition, there are managers who report to these vicepresidents.

These include managers for central purchasing, the university press and bookstore; all

of whom report to the vice president of auxiliary services, and managers for accounting and

finance report to vice president for financial services. Further, a dean who is responsible to the

academic vice-president heads each department.

Questions:

1. Prepare an organizational structure of brilliant University.

2. List the name of the departments having under the university.

Section C: Long Questions (30 Marks)

 This section consists of Long Questions.

 Answer all the questions.

 Each question carry 15 marks each.

 Detailed information should from the part of your Answer (Word limit 200 to 250 words)

1. What is “Cost management”? Explain the primary objectives of cost management?

2. Define “Target costing”; discuss the principles of target costing.

END OF SECTION C

END OF SECTION B

Examination Paper of Project Management

4

IIBM Institute of Business Management

IIBM Institute of Business Management

Examination Paper MM.100

Project Management in Information Technology

Section A: Objective Type & Short Questions (30 marks)

 This section consists of Multiple Choice & Short Note type questions.

 Answer all the questions.

 Part One carries 1 mark each and Part two carries 5 marks each.

Part One:

Multiple forms:

1. „Enterprise project management software (EPMS)‟ integrates information from a single project to

show the status.(T/F)

2. Gantt chart is used for the___________

3. In Adaptive approach for software development the focus is on___________

a. Time based cycles to meet the target dates

b. No time based cycles

c. Although time based but no target date

d. None

4. IEEE standard_____________ describes the contents of software project management plan.

a. 1058 – 1997

b. 1058 – 1998

c. 1058 – 1999

d. 1058 – 1996

5. Scope creep means________

a. The tendency for project scope to shrink

b. The tendency for project scope to grow bigger and bigger

c. The tendency for project scope to collapse completely

d. None

6. Slack or float is the amount of time an activity may be delayed without delaying succeeding

activity.(T/F)

7. „PERT‟ stands for_________

8. „Murphy‟ law states_________

a. If something can go wrong, it can be corrected.

b. If something can go wrong , it will

Examination Paper of Project Management

5

IIBM Institute of Business Management

c. If something can no go wrong , it will

d. None

9. Project that use Six Sigma principles for quality control normally follows a 5 phase improvement

process called DMAIC, here A stands for_______

a. Art

b. Analyze

c. Allies

d. None

10. Fishbone diagram is also called_______

a. Gantt diagram

b. Murphy diagram

c. Parkinson diagram

d. Ishikawa diagram

Part Two:

1. Write a note on „Work Breakdown Structure (WBS)‟.

2. Define the Earned value?

3. Explain the Kichoff meeting?

4. How would you explain the Cross-Referencing requirement Matrix?

END OF SECTION A

Section B: Caselets (40 marks)

 This section consists of Caselets.

 Answer all the questions.

 Each caselet carries 20 marks.

 Detailed information should form the part of your answer (Word limit 200 to 250 words).

Caselet 1

A preliminary estimate of costs for the entire project is $140,000. This estimate is based on the

project manager working about 20 hours per week for six months and other internal staff working a

total of about 60 hours per week for six months. The customer representatives would not be paid for

their assistance. A staff project manager would earn $50 per hour. The hourly rate for the other

project team member would be $70 per hour, since some hours normally billed to clients may be

needed for this project. The initial cost estimate also includes $10,000 for purchasing software &

services from suppliers. After the project is completed, maintenance costs of $40,000 are included

for each year, primarily to update the information and coordinate the “Ask the Expert” feature and

online articles. Projected benefits are based on a reduction in hours consultants spend researching

Examination Paper of Project Management

6

IIBM Institute of Business Management

project management information, appropriate tools and templates, and so on. Projected benefits are

also based on a small increase in profits due to new business generated by this project. If each of

more than 400 consultants saved just 40 hours each year (less than one hour per week) and could bill

that time to other projects that generate a conservative estimate of $10 per hour in profits, then the

projected benefit would be $160,000 per year. If the new intranet increased business by just 1

percent, using past profit information, increased profits due to new business would be at least

$40,000 each year. Total projected benefits, therefore, are about $200,000 per year.

Exhibit A summarizes the projected costs and benefits and shows the estimated net percent value

(NPV), return on investment (ROI), and year in which payback occurs. It also lists assumptions

made in performing this preliminary financial analysis. All of the financial estimates are very

encouraging. The estimate payback is within one year, as requested by the sponsor. The NPV is

$272,800, and the discounted ROI based on a three-year system life is excellent at 112 percent.

Discount rate 8%

Assume the

project is done

in about is

months

Year

0 1 2 3 Total

Costs 140,000 40,000 40,000 40,000

Discount

factor

1 0.93 0.86 0.79

Discounted

costs

140,000 37,037 34,294 31,753 243,084

Benefits 0 200,000 200,000 200,000

Discount

factor

1 0.93 0.86 0.79

Discounted

benefits

0 186,185 171,468 158,766 515,419

Discounted

benefits –

costs

(140,000) 148,148 137,174 127,013

Cumulative

benefits-costs

(140,000) 8,148 145,322 272,336 NVP

Payback in

year 1

Discounted

life cycle

ROI----

112%

Assumptions

Costs #hours

PM (500hours,

$50/hour)

25,000

Staff (1500

hours,

$70/hour)

105,000

Outsourced

software &

10,000

Examination Paper of Project Management

7

IIBM Institute of Business Management

services

Total project

costs (all

applied in year

0)

140,000

Benefits

# consultants 400

Hours saved 40

$/hour profit 10

Benefits from

saving time

160,000

Benefits from

1% increase in

profits

40,000

Total annual

projected

benefits

200,000

1. What according to you are the factors that can hamper the profit growth related with the project?

2. Mention some strategies to further improve the project‟s turnover.

Caselet 2

Many organizations spend a great deal of time and money on training efforts for general project

management skills, but after the training, project managers may still not know how to tailor their

project management skills to the organization‟s particular needs. Because of this problem, some

organizations develop their own internal information technology project management methodologies.

The PMBOKR Guide is a standard that describes best practices for what should be done to manage a

project. A methodology describes how things should be done, and different organizations often have

different ways of doing things. For example, after implementing a systems development life

cycle (SDLC) at Blue Cross Shield of Michigan, the Methods department became aware that

developers and project managers were often working on different information technology project in

different ways. Deliverables were often missing or looked different from project to project. They may

have all had a project charter, status report, technical documents (i.e., database design documents,

user interface requirements, and so on), but how they were producing and delivering these

deliverables was different. There was a general lack of consistency and a need for standards to guide

both new and experienced project managers. Top management decides to authorize funds to develop a

methodology for project managers that could also become the basis for information technology

project management training within the organization. It was also part of an overall effort to help raise

the company‟s Software Capability Maturity Model level.BlueCross BlueShield of Michigan

launched a three-month project to develop its own project management methodology. Some of the

project team members had already received PMP certification, so they decided to base their

methodology on the PMBOKR Guide 2000, making adjustment as needed to best describe how their

organization managed information technology projects. See a complete article on this project on the

companion Web site for this text. Also see the Suggested Reading to review the State of Michigan

Project Management Methodology, which provides another good example of an information

technology project management methodology. Many organizations include project management in

their methodologies for managing Six Sigma projects. Other organizations include project

management in their software development methodologies, such as the Rational Unified Process

(RUP) framework. RUP is an interactive software development process that focuses on team

Examination Paper of Project Management

8

IIBM Institute of Business Management

productivity and delivers software best practices to all team members. According to RUP expert Bill

Cottrell, “RUP embodies industry-standard management and technical methods and techniques to

provide a software engineering process particularly suited to creating and maintaining componentbased

software system solutions,” Cottrell explains that you can tailor RUP to include the PMBOK

process groups. Specifically, IBM Rational, the creators of RUP, found that it could adjust RUP input

artifacts with PMBOK process inputs, RUP steps with PMBOK process tools and techniques, and

RUP resulting artifacts with PMBOK process outputs.

1. According to you what the skills needed for the project management of organization?

2. How could have been the six sigma project became a helpful tool in very sophisticated kind of

project management?

END OF SECTION B

Section C: Applied Theory (30 marks)

 This section consists of Long Questions.

 Answer all the questions.

 Each question carries 15 marks.

 Detailed information should form the part of your answer (Word limit 150 to 200 words).

1. How would you explain the project manager? Explain the characteristics of the successful project

manager?

2. Define the IT project plan? Discuss the IT project plan format in detail?

END OF SECTION C

S-2-300813

IIBM MBA EXAMINATION ANSWER SHEETS PROVIDED WHATSAPP 91 9924764558

 IIBM MBA EXAMINATION ANSWER SHEETS PROVIDED WHATSAPP 91 9924764558

CONTACT

DR. PRASANTH BE MBA PH.D. MOBILE / WHATSAPP: +91 9924764558 OR +91 9447965521 EMAIL: prasanththampi1975@gmail.com WEBSITE: www.casestudyandprojectreports.com

Examination Paper of Business Communication

IIBM Institute of Business Management

• This section consists of multiple choices and Short Notes type questions.

• Answer all the questions.

• Part one questions carry 1 mark each & Part two questions carry 5 marks each.

IIBM Institute of Business Management

Subject Code-B109

Examination Paper Business Communication

MM.100

Section A: Objective Type & Short Questions (30 marks)

Part one:

Multiple choice:

I.The most important goal of business communication is_________. (1)

a) favorable relationship between sender and receiver

b) organizational goodwill

c) receiver response

d) receiver understanding

II. Down ward communication flows from_________ to_________. (1)

e) Upper to lower

f) Lower to upper

g) Horizontal

h) Diagonal

III. Horizontal communication takes place

between_________. (1)

a. superior to subordinate

b. subordinate to superior

c. employees with same status

d. none of these

IV. The study of communication through touch is_________. (1)

a. chronemics

b. haptics

c. proxemics

d. semantic

V._____________ channel of communication is known as grapevine (1)

a. Formal

b. Informal

c. Horizontal

d. Vertical

VI. The following is (are) the most effective ways of communication. (1) a. Verbal b. Non verbal c. Written d. All of the above

Examination Paper of Business Communication

IIBM Institute of Business Management

END OF SECTION A

• This section consists of Caselets.

• Answer all the questions.

• Each Caselet carries 20marks.

• Detailed information should form the part of your answer (Word limit 150 to 200 words).

VII. The handshake that conveys confidence

is (1)

a. Limp

b. Firm

c. Loose

d. Double

VIII. ________ of the letter consists of main

message. (1)

a. Heading

b. Body

c. Greeting

d. Closing

IX. Body of a letter is divided into ________

parts. (1)

a. 1

b. 2

c. 3

d. 4

X. X. A persuasive message will fail if_____ (1)

a. it does not focus on what is in it for

the reader

b. it only lists facts

c. it moves too slowly

d. all of the above

Part Two:

1. Brief Grapevine communication? (5)

2. List the 7 C’s of Communication? (5)

3. Describe the various barriers of communication? (5)

4. Write the negotiation process. (5)

Section B: Caselets (40 marks)

Caselet 1

Barry and Communication Barriers Effective Communication as a Motivator One common

complaint employees voice about supervisors is inconsistent messages – meaning one

supervisor tells them one thing and another tells them something different. Imagine you are the

supervisor/manager for each of the employees described below. As you read their case, give

Examination Paper of Business Communication

IIBM Institute of Business Management

consideration to how you might help communicate with the employee to remedy the conflict. Answer the critical thinking questions at the end of the case then compare your answers to the Notes to Supplement Answers section. Barry is a 27-year old who is a foodservice manager at a casual dining restaurant. Barry is responsible for supervising and managing all employees in the back of the house. Employees working in the back of the house range in age from 16 years old to 55 years old. In addition, the employees come from diverse cultural and ethnic backgrounds. For many, English is not their primary language. Barry is Serv Safe® certified and tries his best to keep up with food safety issues in the kitchen but he admits it’s not easy. Employees receive “on the job training” about food safety basics (for example, appropriate hygiene and hand washing, time/temperature, and cleaning and sanitizing). But with high turnover of employees, training is often rushed and some new employees are put right into the job without training if it is a busy day. Eventually, most employees get some kind of food safety training. The owners of the restaurant are supportive of Barry in his food safety efforts because they know if a food safety outbreak were ever linked to their restaurant; it would likely put them out of business. Still, the owners note there are additional costs for training and making sure food is handled safely. One day Barry comes to work and is rather upset even before he steps into the restaurant. Things haven’t been going well at home and he was lucky to rummage through some of the dirty laundry and find a relatively clean outfit to wear for work. He admits he needs a haircut and a good hand scrubbing, especially after working on his car last evening. When he walks into the kitchen he notices several trays of uncooked meat sitting out in the kitchen area. It appears these have been sitting at room temperature for quite some time. Barry is frustrated and doesn’t know what to do. He feels like he is beating his head against a brick wall when it comes to getting employees to practice food safety. Barry has taken many efforts to get employees to be safe in how they handle food. He has huge signs posted all over the kitchen with these words: KEEP HOT FOOD HOT AND COLD FOOD COLD and WASH YOUR HANDS ALWAYS AND OFTEN. All employees are given a thermometer when they start so that they can temp food. Hand sinks, soap, and paper towels are available for employees so that they are encouraged to wash their hands frequently.

Questions

1. What are the communication challenges and barriers Barry faces? (10)

2. What solutions might Barry consider in addressing each of these challenges and barriers? (10)

Caselet 2

Mr. Dutta, newly appointed president of century Airlines, knew the company’s survival depended on customer service, which in turn depended on motivated employees. So he created the Century Spirit program to build team spirit by encouraging employee participation, individual initiative, and open communication. Among the program’s early successes was newspaper started by a group of flight attendants. The plane truth published information about benefits and work conditions as well as feature stories and humorous articles. It quickly became popular not only with flight attendant but with pilot, machinists, and baggage handlers.

As time went on, though, the plane truth began to run articles critical of the company. When management cut back worker’s hours, the, newspaper questioned what sacrifices the executive were making. When the technical services department releases figures showing long turnaround times, the paper questioned the machinist’s work ethic. Worried that customer might see the newspaper; Mr. Dutta wanted to cancel it. The president of the flight attendants union also wanted to see it was stirring up trouble with the machinists.

Examination Paper of Business Communication

IIBM Institute of Business Management

• This section consists of Applied Theory Questions.

• Answer all the questions.

• Each question carries 15marks.

• Detailed information should form the part of your answer (Word limit 200 to 250 words).

END OF SECTION C

Ms. Rachel, Century’s human resource director, was asked to stop the publication. But she hesitated. She knew the employee morale was on the brink, but she did not know whether the newspaper was venting worker’s frustrations and reinforcing team spirit or stirring up old animosities and bringing the whole company down. Was it creating more tension than unity or vice-versa?

Questions

1. What Communication issues are involved at Century Airlines? (10)

2. What Communication Channels are being Utilized (10)

Section C: Applied Theory (30 marks)

1. Explain the various non verbal communications with an example in business

Scenario? (15)

2. Delineate the types of parts of business report writing? (15)

S-2-010619

Examination Paper of Management Information Systems

IIBM Institute of Business Management

IIBM Institute of Business Management

SubjectCode-B110

Examination Paper

Management Information Systems

MM.100

Section A: Objective Type & Short Questions (30 marks)

Part one:

Multiple choice:

I.A person machine-system and a highly integrated grouping of information-processing functions designed to provide management with a comprehensive picture of specific operation is called (1)

a) DSSB

b) MISC

c) IISD

II. Which one of the following is not an important characteristic of useful and effective information? (1)

a) Accuracy

b) Timelines

c) Completeness

d) Economy

d) All of the above

III. The most important reason for failure of MIS is (1)

a) Use of improper tools for design

b) Noninvolvement of end-user

c) Improper specification

d) None of the above

IV. Top level Managers use (1)

a) Strategic information

b) Tactical information

c) Operational information

d) None of these

V.System is an important factor of MIS. There are various types of systems. Which one of the following is not a system? (1)

a) Physical system

b) Integrated system

c) Open system

d) Open system

VI. Which one of the following is not an approach for development of MIS? (1) a) Hierarchical approach b) Integrative approach c) Modular approach d) Elective approach

 This section consists of multiple choices and Short Notes type questions.

 Answer all the questions.

 Part one questions carry 1 mark each & Part two questions carry 5 marks each.

Examination Paper of Management Information Systems

IIBM Institute of Business Management

VII. Management is linked to information by (1)

a. Decisions

b. Data

c. Both [A] And [B]

d. None Of The Above

VIII. Which pattern reflects a pure executive form of management?

(1)

a. Functional

b. Line

c. Line and Staff

d. Committee

IX. The term financial engineering is related to (1)

a) Cost of production

b) Financial restructuring

c) Product planning

d) Capital issue

X. The goal of financial management is to (1)

a) Maximize the wealth of preference share holders

b) Maximize the wealth of debenture holders

c) Maximize the wealth of equity share holders

d) All of the above

Part Two:

1. What is purpose of information system from a business perspective? (5)

2. What are Enterprise System? How do they benefit businesses? (5)

3. Differentiate DSS from MIS. (5)

4. What do you mean by Data visualizations? (5)

Section B: Caselets (40 marks)

END OF SECTION A

 This section consists of Caselets.

 Answer all the questions.

 Each Caselet carries 20marks.

 Detailed information should form the part of your answer (Word limit 150 to 200 words).

IIBM Institute of Business Management

Examination Paper of Management Information System

Caselet -1

A waiter takes an order at a table, and then enters it online via one of the six terminals located in the restaurant dining room. The order is routed to a printer in the appropriate preparation area: the cold item printer if it is a salad, the hot-item printer if it is a hot sandwich or the bar printer if it is a drink. A customer’s meal check-listing (bill) the items ordered and the respective prices are automatically generated. This ordering system eliminates the old three-carbon-copy guest check system as well as any problems caused by a waiter’s handwriting. When the kitchen runs out of a food item, the cooks send out an ‘out of stock’ message, which will be displayed on the dining room terminals when waiters try to order that item. This gives the waiters faster feedback, enabling them to give better service to the customers. Other system features aid management in the planning and control of their restaurant business. The system provides up-to-the-minute information on the food items ordered and breaks out percentages showing sales of each item versus total sales. This helps management plan menus according to customers’ tastes. The system also compares the weekly sales totals versus food costs, allowing planning for tighter cost controls. In addition, whenever an order is voided, the reasons for the void are keyed in. This may help later in management decisions, especially if the voids consistently related to food or service. Acceptance of the system by the users is exceptionally high since the waiters and waitresses were involved in the selection and design process. All potential users were asked to give their impressions and ideas about the various systems available before one was chosen.

Questions

1. What would make the system a more complete MIS rather than just doing transaction processing? (10)

2. Explain the probable effects that making the system more formal would have on the customers and the management? (10)

Caselet 2

The Company is considered to be a leader in the design and production of industrial and commercial air-conditioning equipment. While most of the products were standard items, a considerable number involving large sales volume were specially designed for installation in big office buildings and factories. Besides being an innovator in product design and having an exceptionally good customer service department, the company is well known for its high-quality products and its ability to satisfy the customer requirements promptly.

Because of its rapid growth, the company had to be careful with its cash requirements, especially for accounts receivable and for inventories. For many years, the company had kept inventories under close control at a level equal to 1.7 times the monthly sales, or a turnover of nearly 6 times per year. But, all of a sudden, inventories soared to triple monthly sales, and the company found itself with Rs.30 crores of inventories above a normal level. Calculating a cost of carrying inventory at 30 percent of the value of

IIBM Institute of Business Management

Examination Paper of Management Information System

inventories (including the cost of money, storage and handling, and obsolescence), it was estimated that this excess inventory was costing the company Rs.9 crores per year in profits before taxes. In addition, it forced the to call on its bank for more loans than had company been expected.

Mr. Dcepak Mehra, president of Connair, was understandably worried and incensed when this matter came to his attention. He was told that the primary reasons for this rise in inventory were excessive buying of raw materials in advance because of anticipated shortages and the failure of a new computer software, with the result the people in the production and purchasing departments were not having complete information as to what was happening to inventory for several months.

Mr. Mehra, taking the stand that no company should let something like this surplus inventory occur without advance notice and that no manager can be expected to control a business on the basis of history, instructed his vice-president for finance to come up with a program to get better control of inventories in the future.

Questions for Discussion:

1. What do you find wrong with Connair's controls? (10)

2. Are there any other techniques or approaches to control that you would suggest? (10)

Section C: Applied Theory (30 marks)

1. List and describe the information systems serving each of the major functional areas of business? (15)

2. What are the characteristics of MIS? How MIS do differs from TPS? (15)

S-2-010619

 This section consists of Applied Theory Questions.

 Answer all the questions.

 Each question carries 15marks.

 Detailed information should form the part of your answer (Word limit 200 to 250 words).

END OF SECTION C

END OF SECTION B

Examination Paper of Production and Operations Management

IIBM Institute of Business Management

IIBM Institute of Business Management

Subject Code-B107 Examination Paper

Production and Operations Management

MM.100

Section A: Objective Type & Short Questions (30 marks)

Part one:

Multiple choice:

I.The purpose of the transportation approach for locational analysis is to minimize (1)

a) Total costs

b) Total shipping costs

c) Total variable costs

d) Total fixed costs

II. Which of the following would not generally be a motive for a firm to hold inventories? To (1)

e) Take advantage of quantity discounts

f) Minimize holding costs

g) Reduce stock out risks

h) Decouple production from distribution

III. Which of the following are assignable cause? (1)

a. Large variations in hardness of material

b. Tool wear

c. Errors in setting

d. All of the above

IV. Like roots of a tree, ________of organization is hidden from direct view.

(1)

a. Goodwill

b. Core competence

c. Higher management

d. Capital investment

 This section consists of multiple choices and Short Notes type questions.

 Answer all the questions.

 Part one questions carry 1 mark each & Part two questions carry 5 marks each.

Examination Paper of Production and Operations Management

IIBM Institute of Business Management

V.Inadequate production capacity ultimately leads to (1)

a. Poor quality

b. Poor Customer Service

c. Poor inventory control

d. All of the above

VI. Limitations of Traditional cost accounting are (1) a. Assumes factory as an isolated entity b. It measures only the cost of producing c. Both (A) and (B) d. None of the above

VII. Business is rated on which dimensions

(1)

a. Market attractiveness

b. Business strength

c. Both (A) and (B)

d. None of the above

VIII. How does ‘structure’ reduce external uncertainty arising out of human behavior (1)

a. Research and planning

b. Forecasting

c. Both (A) and (B)

d. None of the above

IX. Objective of Work Study is to improve _______ (1)

a. Cycle time

b. Productivity

c. Production

d. All of the above

X. Which of the following are activities of corrective maintenance? (1)

a. Overhauling

b. Emergency repairs

c. Modifications and improvements

d. All of the above

Part Two:

1. What are the dimensions of quality? (5)

2. What is Quality? (5)

3. What is Materials Planning? (5)

4. Need for Inventory Management - Why do Companies hold inventories? (5)

Section B: Caselets (40 marks)

END OF SECTION A

 This section consists of Caselets.

 Answer all the questions.

 Each Caselet carries 20marks.

 Detailed information should form the part of your answer (Word limit 150 to 200 words).

IIBM Institute of Business Management

Examination Paper of Production and Operations Management

Caselet 1

The pizza business did well and by 1965, Thomas was able to open two more stores in the town -Pizza King and Pizza from the Prop. Within a year, Varti opened a pizza store in a neighborhood town with the same name, DomiNick's Pizza. Thomas decided to change the name of his first store, DomiNick's Pizza, and one of his employees suggested the name Domino's Pizza(Domino's). The advantage of this name Thomas felt was that it would be listed after DomiNick in the directory. Domino's philosophy rested on two principles - limited menu and delivering hot and fresh pizzas within half-an-hour. In 1967, it opened the first franchise store in Ypsilanti, and in 1968, a franchise store in Burlington, Vermont. However, the company ran into problems when its headquarters (the first store) and commissary were destroyed by fire. In the early 1970s, the company faced problems again when it was sued by Amstar, the parent company of Domino Sugar for trademark infringement. Thomas started looking for a new name and came up with Red Domino's and Pizza's Dispatch. However, there wasn't any need for it because Domino's won the lawsuit in 1980.In 1982, Domino's Pizza established Domino's Pizza International (DPI) that was made responsible for opening Domino's stores internationally. The first store was opened in Winnipeg, Canada. Within a year, DPI spread to more than 50 countries and in 1983, it inaugurated its1000th store. Around the same time, new pizza chains like Pizza Hut and Little Caesar established themselves in the USA. Domino's Pizza faced intense competition because it had not changed its menu of traditional hand-tossed pizza. The other pizza chains offered low-priced breadsticks, salads and other fast food apart from pizzas. Domino's faced tough competition from Pizza Hut in the home delivery segment also. Little Caesar was eating into Domino's market share with its innovative marketing strategies. By 1989, Domino's sales had reduced significantly and cash flows were affected due to the acquisition of assets. In 1993, Thomas took measures to expand Domino's product line, in an attempt to revive the company and tackle competition. The company introduced pan pizza and bread sticks in the USA. In late 1993, Domino's introduced the Ultimate Deep Dish Pizza and Crunchy Thin Crust Pizza. In 1994, it rolled out another non-pizza dish - Buffalo wings. Though Domino's did not experiment with its menu for many years, the company adopted innovative ways in managing a pizza store. Thomas gave about 90% of the franchisee agreements in the USA to people who had worked as drivers with Domino's. The company gave ownership to qualified people, after they had successfully managed a pizza store for a year and had completed a training course. Domino's also gave franchises to candidates recommended by existing franchisees. Outside the USA, most of Domino's stores were franchise-owned. Domino's was also credited for many innovations in the pizza industry and setting standards for other pizza companies. It has developed dough trays, corrugated pizza boxes, insulated bags for delivering pizzas, and conveyor ovens.

In 1993, Domino's withdrew the guarantee of delivering pizzas within 30-minutes of order andstarted emphasizing on Total Satisfaction Guarantee (TSG) which read: "If for any reason, you are dissatisfied with your Domino's Pizza dining experience, we will re-make your pizza or refund your money." Domino's entered India in 1996 through a franchise agreement with VamBhartia Corp in Delhi. With the overwhelming success of the first outlet, the company opened another outlet in Delhi. By 2000, Domino's had outlets in all major cities in India. When

IIBM Institute of Business Management

Examination Paper of Production and Operations Management

Domino's entered India, the concept of home delivery was still in its nascent stages. It existed only in some major cities and was restricted to delivery by the friendly neighborhood fast food outlets. Eating out at 'branded' restaurants was more common. To penetrate the Indian market, Domino's introduced an integrated home delivery system from a network of company outlets within 30 minutes of the order. Goutham Advani (Advani), Chief of Marketing, Domino's Pizza India, said, "What really worked its way into the Indian mind set was the promised 30-minute delivery." Domino's also offered compensation: Rs.30/- off the price tag if there was a delay in delivery. For the first 4 years in India, Domino's concentrated on its 'Delivery' strategy.

Domino's Logistics Model

Analysts felt that Domino's took a cue from McDonald's supply chain model. However, they opined that the level of complexity in McDonald's system in India was not as high as that of Domino's. Commented Bhatia ,"McDonald's operations are not as spread out as ours. They are in four cities while we are in 16.Centralizing wouldn't work on such a geographical scale”. The logistics model adopted by Domino's offered some obvious benefits including lower transportation costs, cheaper procurement and economies of scale. Domino's had already cut out the duplication in procurement and processing of raw materials across each of the three commissaries. The old model of self-contained commissaries had another disadvantage: adding new outlets did not translate into greater economies of scale. Bhatia planned to extend the model to other parts of the country as well. The commissary was to be located near the largest market in that region. Bhatia said, "Our roll-out began only after we mapped out our procurement strategy." Based on the agricultural map of India, Domino's looked McDonald's had one of the best logistics models in India. To maintain consistency and quality of its products, McDonald's shipped all the raw materials lettuce, patties et al to a cold storage close to the main market. Based on a daily demand schedule that was prepared a day in advance, the required amount of raw material was transported to individual outlets to get the best product at the lowest cost.

Thus, tomatoes would come from Bhubaneswar, spices from the south, baby corn from Nepal (where it's 40% cheaper than in India) and vegetables from Sri Lanka. Similarly, Domino's India planned to extend its operations to Nepal, Sri Lanka and Dhaka. The company planned to establish a commissary in Sri Lanka. Domino's also identified specialty crops in each region. The commissary in that region was entrusted with the task of processing that specialty crop. For instance, the commissary for the eastern region in Kolkata was responsible for buying tomatoes, processing them and then sending them to all the other commissaries. Similarly, the northern commissary had to deliver pizza bases. This way, Domino's minimized duplication as well as the dangers of perish ability. Once the new model was formalized, Bhatia planned to use Domino's 25 refrigerated trucks to transport products for other companies on the same route. For instance, if an operator in Kochi(Kerala) needed to transport specialty cheese, he could use the Domino's fleet to transport his products. Said Bhatia, "Not too many people have refrigerated trucks in the country. And we can offer them quality service because we will be giving them standards we use for ourselves." Company sources said that enquiries from clients for such transport facilities had started coming in. Bhatia said he was in the process of selecting a person to head the logistics operation, which would be spun off as a separate profit centre. Bhatia seemed confident that the profit centre had the potential to bring in Rs 10 by 2006. However, he said the profit center would not be allowed to impede the growth of the pizza

IIBM Institute of Business Management

Examination Paper of Production and Operations Management

business, Domino's core operation. Only those deliveries that did not delay or deroute the truck would be considered

Questions

1. Describe about the Article for Logistics and Operations Management Domino’s Pizza’s Process Technology (20)

Caselet 2

ABC Ltd. is the country’s largest manufacturer of spun yarn with well-established market. ABC Ltd. has good reputation for quality and service. Their marketing department identified that the potential for global market is expanding rapidly and hence the company undertook exercise for expansion of the capacity for export market. The company formed team of Marketing and Materials department to study the global logistics possibilities. After extensive study, the team came up with a report on global logistics and submitted that global logistics is essentially same as domestic due to following similarities: • The conceptual logistics framework of linking supply sources, plants, warehouses and customers is the same. • Both systems involve managing the movement and storage of products. • Information is critical to effective provision of customer service, management of inventory, vendor product and cost control. • The functional processes of inventory management, warehousing, order processing, carrier selection, procurement, and vendor payment are required for both. • Economic and safety regulations exist for transportation. The company had very economical and reliable transportation system in existence. For exports as well they decided to evaluate capabilities of their existing transporter and entrusted them with the job of transport till port. For customs formalities they engaged a good CHA after proper cost evaluation and entered into contract for freight with shipping company agent. The response for company’s export was very good and the company could get as many as 15 customers within first two months and reached to a level of USD 250,000 per month by the end of first half of the year. Based on this response the export volumes were expected to grow to a level of USD 400,000 per month by the end of the year. When the review was made at the end of the year, company found that export volumes had in fact come down to the level of USD 120,000 which was much lower than it had reached in the first half of the year. The managing committee had an emergency meeting to discuss this and the export manager was entrusted with the task of identifying the reasons for this decline. Mr. Ganesh decided to visit the customers for getting the first hand information. When he discussed the matter with the customers, the feedback on the quality and price were good but the customers were very upset on the logistic services due to delayed shipments, frequent changes in shipping schedules, improper documentation, improper identifications, package sizes, losses due to transit damages etc. After coming back, the export manager checked the dispatch schedules and found that production and ex-works schedules were all proper. Then he studied the logistics systems and found that the logistics cost was very high and all the logistics people were demotivated due to the overwork and were complaining of total lack of co-ordination and the system had become totally disorganized.

Questions

1. Explain the problems experienced by ABC Ltd. What is the main cause of these problems? (20)

END OF SECTION B

IIBM Institute of Business Management

Examination Paper of Production and Operations Management

Section C: Applied Theory (30 marks)

1. The Advantages & Disadvantages of Economic Order Quantity (EOQ)? (15)

2. Distinguish between just-in-time and just-in-case as stock management systems?(15)

S-2-010619

 This section consists of Applied Theory Questions.

 Answer all the questions.

 Each question carries 15marks.

 Detailed information should form the part of your answer (Word limit 200 to 250 words).

END OF SECTION C

Examination Paper of Strategic Management

IIBM Institute of Business Management

IIBM Institute of Business Management

SubjectCode-B108 Examination Paper

Strategic Management

MM.100

Section A: Objective Type & Short Questions (30 marks)

Part one:

Multiple choice:

I. Horizontal integration is concerned with

(1)

a) Production

b) Quality

c) Product planning

d) All of the above

II. It refers to formal and informal rules, regulations and procedures that complement the company structure (1)

a) Strategy

b) Systems

c) Environment

d) All of the above

III. Strategic management is mainly the responsibility of (1)

a. Lower management

b. Middle management

c. Top management

d. All of the above

IV. Formal systems are adopted to bring ________ & amalgamation of decentralized units into product groups.

(1)

a. Manpower

b. Co-ordination

c. Production

d. All of the above

 This section consists of multiple choices and Short Notes type questions.

 Answer all the questions.

 Part one questions carry 1 mark each & Part two questions carry 5 marks each.

Examination Paper of Strategic Management

IIBM Institute of Business Management

IV.Like roots of a tree, ________of organization is hidden from direct view. (1)

a. Performance

b. Strategy

c. Core competence

d. All of the above

V. The actual performance deviates positively over the budgeted performance. This is an indication of ……….. Performance. (1) a. Superior b. Inferior c. Constant d. Any of the above

VI. Criteria for making an evaluation is (are)

(1)

a. Consistency with goals

b. Consistency with environment

c. Money

d. All of the above

VII. Changes in company ………. also necessitates changes in the systems in various degrees (1)

a. structure

b. system

c. strategy

d. turnover

VIII. Micro environment is the ………. environment of a company. (1)

a. Working

b. Human

c. External

d. Internal

X Techniques used in environmental appraisal are (1)

a.Single-variable

extrapolation/multivariable

interaction analysis

b.Structured/ unstructured

expert/inexpert opinion

c.Dynamic modes and mapping

d.All of the above

Part Two:

1. Distinguish between a strategy and tactics. (5)

2. Give an outline of relation between ‘Strategy and Customer’ in brief? (5)

3. Explain in brief the concept of strategic thinking? (5)

4. What are the basic elements of planning? (5)

Section B: Caselets (40 marks)

END OF SECTION A

 This section consists of Caselets.

 Answer all the questions.

 Each Caselet carries 20marks.

 Detailed information should form the part of your answer (Word limit 150 to 200 words).

IIBM Institute of Business Management

Examination Paper of Strategic Management

Caselet 1

Apple’s profitable but risky strategy

When Apple’s Chief Executive – Steven Jobs – launched the Apple iPod in 2001 and the iPhone in 2007, he made a significant shift in the company’s strategy from the relatively safe market of innovative, premium-priced computers into the highly competitive markets of consumer electronics. This case explores this profitable but risky strategy.

Early beginnings

To understand any company’s strategy, it is helpful to begin by looking back at its roots. Founded in 1976, Apple built its early reputation on innovative personal computers that were particularly easy for customers to use and as a result was priced higher than those of competitors. The inspiration for this strategy came from a visit by the founders of the company – Steven Jobs and Steven Wozniack – to the Palo Alto research laboratories of the Xerox Company in 1979. They observed that Xerox had developed an early version of a computer interface screen with the drop-down menus that are widely used today on all personal computers. Most computers in the late 1970s still used complicated technical interfaces for even simple tasks like typing – still called ‘word-processing’ at the time.

Jobs and Wozniack took the concept back to Apple and developed their own computer – the Apple Macintosh (Mac) – that used this consumer-friendly interface. The Macintosh was launched in 1984. However, Apple did not sell to, or share the software with, rival companies. Over the next few years, this non-co-operation strategy turned out to be a major weakness for Apple.

Battle with Microsoft

Although the Mac had some initial success, its software was threatened by the introduction of Windows 1.0 from the rival company Microsoft, whose chief executive was the well-known Bill Gates. Microsoft’s strategy was to make this software widely available to other computer manufacturers for a license fee – quite unlike Apple. A legal dispute arose between Apple and Microsoft because Windows had many on-screen similarities to the Apple product. Eventually, Microsoft signed an agreement with Apple saying that it would not use Mac technology in Windows 1.0. Microsoft retained the right to develop its own interface software similar to the original Xerox concept.

Coupled with Microsoft’s willingness to distribute Windows freely to computer manufacturers, the legal agreement allowed Microsoft to develop alternative technology that had the same on-screen result. The result is history. By 1990, Microsoft had developed and distributed a version of Windows that would run on virtually all IBM-compatible personal computers – see Case 1.2. Apple’s strategy of keeping its software exclusive was a major strategic mistake. The company was determined to avoid the same error when it

IIBM Institute of Business Management

Examination Paper of Strategic Management

came to the launch of the iPod and, in a more subtle way, with the later introduction of the iPhone.

Apple’s innovative products

Unlike Microsoft with its focus on a software-only strategy, Apple remained a full-line computer manufacturer from that time, supplying both the hardware and the software. Apple continued to develop various innovative computers and related products. Early successes included the Mac2 and PowerBooks along with the world’s first desktop publishing program – PageMaker. This latter remains today the leading program of its kind. It is widely used around the world in publishing and fashion houses. It remains exclusive to Apple and means that the company has a specialist market where it has real competitive advantage and can charge higher prices.

Not all Apple’s new products were successful – the Newton personal digital assistant did not sell well. Apple’s high price policy for its products and difficulties in manufacturing also meant that innovative products like the iBook had trouble competing in the personal computer market place.

Apple’s move into consumer electronics

Around the year 2000, Apple identified a new strategic management opportunity to exploit the growing worldwide market in personal electronic devices – CD players, MP3 music players, digital cameras, etc. It would launch its own Apple versions of these products to add high-value, user-friendly software. Resulting products included iMovie for digital cameras and I DVD for DVD-players. But the product that really took off was the iPod – the personal music player that stored hundreds of CDs. And unlike the launch of its first personal computer, Apple sought industry co-operation rather than keeping the product to itself.

Launched in late 2001, the iPod was followed by the iTunes Music Store in 2003 in the USA and 2004 in Europe – the Music Store being a most important and innovatory development. iTune was essentially an agreement with the world’s five leading record companies to allow legal downloading of music tracks using the internet for 99 cents each. This was a major coup for Apple – it had persuaded the record companies to adopt a different approach to the problem of music piracy. At the time, this revolutionary agreement was unique to Apple and was due to the negotiating skills of Steve Jobs, the Apple Chief Executive, and his network of contacts in the industry. Apple’s new strategy was beginning to pay off. The iPod was the biggest single sales contributor in the Apple portfolio of products.

In 2007, Apple followed up the launch of the iPod with the iPhone, a mobile telephone that had the same user-friendly design characteristics as its music machine. To make the iPhone widely available and, at the same time, to keep control, Apple entered into an exclusive contract with only one national mobile telephone carrier in each major country – for example, AT&T in the USA and O2 in the UK. Its mobile phone was premium priced – for

IIBM Institute of Business Management

Examination Paper of Strategic Management

example, US$599 in North America. However, in order to hit its volume targets, Apple later reduced its phone prices, though they still remained at the high end of the market. This was consistent with Apple’s long-term, high-price, high-quality strategy. But the company was moving into the massive and still-expanding global mobile telephone market where competition had been fierce for many years.

And the leader in mobile telephones – Finland’s Nokia – was about to hit back at Apple, though with mixed results. But other companies, notably the Korean company Samsung and the Taiwanese company, HTC, were to have more success later.

So, why was the Apple strategy risky?

By 2007, Apple’s music player – the iPod – was the premium-priced, stylish market leader with around 60 per cent of world sales and the largest single contributor to Apple’s turnover. Its iTune download software had been re-developed to allow it to work with all Windows-compatible computers (about 90 percent of all PCs) and it had around 75 percent of the world music download market, the market being worth around US$1000 million per annum. Although this was only some 6 percent of the total recorded music market, it was growing fast. The rest of the market consisted of sales of CDs and DVDs direct from the leading recording companies.

In 2007, Apple’s mobile telephone – the iPhone – had only just been launched. The sales objective was to sell 10 million phones in the first year: this needed to be compared with the annual mobile sales of the global market leader, Nokia, of around 350 million handsets. However, Apple had achieved what some commentators regarded as a significant technical breakthrough: the touch screen. This made the iPhone different in that its screen was no longer limited by the fixed buttons and small screens that applied to competitive handsets. As readers will be aware, the iPhone went on to beat these earlier sales estimates and was followed by a new design, the iPhone 4 in 2010.

The world market leader responded by launching its own phones with touch screens. In addition, Nokia also launched a complete download music service. Referring to the new download service, Rob Wells, senior Vice President for digital music at Universal commented: ‘This is a giant leap toward where we believe the industry will end up in three or four years’ time, where the consumer will have access to the celestial jukebox through any number of devices.’ Equally, an industry commentator explained: ‘[For Nokia] it could be short-term pain for long-term gain. It will steal some of the thunder from the iPhone and tie users into the Nokia service.’ Readers will read this comment with some amazement given the subsequent history of Nokia’s smart phones that is described in Case 9.2.

‘Nokia is going to be an internet company. It is definitely a mobile company and it is making good progress to becoming an internet company as well,’ explained Olli PekkaKollasvuo, Chief Executive of Nokia. There also were hints from commentators that Nokia was likely to make a loss on its new download music service. But the company was determined to ensure that Apple was given real competition in this new and unpredictable market.

IIBM Institute of Business Management

Examination Paper of Strategic Management

Here lay the strategic risk for Apple. Apart from the classy, iconic styles of the iPod and the iPhone, there is nothing that rivals cannot match over time. By 2007, all the major consumer electronics companies – like Sony, Philips and Panasonic – and the mobile phone manufacturers – like Nokia, Samsung and Motorola – were catching up fast with new launches that were just as stylish, cheaper and with more capacity. In addition, Apple’s competitors were reaching agreements with the record companies to provide legal downloads of music from websites.

Apple’s competitive reaction

As a short term measure, Apple hit back by negotiating supply contracts for flash memory for its iPod that were cheaper than its rivals. Moreover, it launched a new model, the iPhone 4 that made further technology advances. Apple was still the market leader and was able to demonstrate major increases in sales and profits from the development of the iPod and iTunes. To follow up this development, Apple launched the Apple Tablet in 2010 – again an element of risk because no one really knew how well such a product would be received or what its function really was. The second generation Apple tablet was then launched in 2011 after the success of the initial model. But there was no denying that the first Apple tablet carried some initial risks for the company.

All during this period, Apple’s strategic difficulty was that other powerful companies had also recognized the importance of innovation and flexibility in the response to the new markets that Apple itself had developed. For example, Nokia itself was arguing that the markets for mobile telephones and recorded music would converge over the next five years. Nokia’s Chief Executive explained that much greater strategic flexibility was needed as a result: ‘Five or ten years ago, you would set your strategy and then start following it. That does not work anymore. Now you have to be alert every day, week and month to renew your strategy.’

If the Nokia view was correct, then the problem for Apple was that it could find its market-leading position in recorded music being overtaken by a more flexible rival – perhaps leading to a repeat of the Apple failure 20 years earlier to win against Microsoft. But at the time of updating this case, that looked unlikely. Apple had at last found the best, if risky, strategy.

Questions

1. using the concepts in this chapter undertake a competitive analysis of both Apple and Nokia – who is stronger? (10)

2. What are the problems with predicting how the market and the competition will change over the next few years? What are the implications for strategy development? (10)

IIBM Institute of Business Management

Examination Paper of Strategic Management

Caselet 2

Mr. Ashwin is the marketing manager of the cosmetics. division of the Medwin Drug Company. The company was well known as a leader in new proprietary drug and toiletry products and had a good record of profitability. The cosmetics division had been especially successful in women's toiletries and .1/4.-o..,unctitk.:s and in the introduction of new products, It always based its new-product development on market research respect to what Would appeal to women and, after almost invariably test marketing a new product in a few almost invarariably test marketing a new product in selected cities, launched it with a heavy advertising and sales promotion program. It had hoped in this way not only to get a large initial share of the markets but also to become so well entrenched that competitors. who soon copy a successful product would not dislodge it from its market share.

After being cautioned by the president of Medwin Drug about the necessity for watching costs more carefully, the division manager became increasingly concerned with two opposing factors in his marketing strategy: ( 1) test marketing of new products (offering them for sale first in a few test cities with area advertising and sales programs) tended increasingly to give competitors advance information on new products, and certain competitors had been able to copy a product almost as soon as Medwin could offer it nationally and profited thereby from Medwin's advertising; and (2) national advertising and sales promotion expenses were rising so fast that a single major product failure would have an important impact on division profits, on which his annual bonus was primarily determined. On the one hand, he recognized the wisdom of test marketing, but he disliked the costs and dangers involved. On the other hand, he hardly wished to take an unknown risk of embarking on a national program until a test showed that the product did in fact have a good market demand. Yet, he wondered whether all products should be test marketed.

Mr. Ashwin was asked to put this problem to his marketing department subordinates and ask them what should be done. To give the strategy some meaning, he used as a case at point the company's new hair conditioner which had been developed on the basis of promising, although preliminary, market research. He asked his sales manager whether he thought the product would succeed and what he thought his "best estimate" of sales would be. He also asked his advertising manager to give some cost estimates on launching the product.

Mr. Kiran, division sales manager, thought a while, then said he was convinced that the product was a winner and that his best estimate would be sales of Rs. 5 crores per year for at least five years. Mr. Desai, the advertising manager, said that the company could launch the product for a cost of Rs. 1 crore the first year and some Rs. 25 lakhs per year thereafter. He also pointed out that the test-marketing program would cost Rs. 15 lakhs, of which half would be saved if these test cities were merely a part of a national program, and that the testing program would delay the national program for six months. But he warned Mr. Ashwin that test marketing would save the gamble of so much money on the national promotion program. At this point, Mr. Sachdev, the new marketing research manager, suggested that the group might come to a better decision if they used a proper decision-making technique.

Question:

1. Which decision-making technique can be used in this situation? Why? (20)

IIBM Institute of Business Management

Examination Paper of Strategic Management

Section C: Applied Theory (30 marks)

1. What are the main characteristics of strategic decisions? (15)

2. What specific entrepreneurial aspects include the strategy formation process? (15)

S-2-010619

 This section consists of Applied Theory Questions.

 Answer all the questions.

 Each question carries 15marks.

 Detailed information should form the part of your answer (Word limit 200 to 250 words).

END OF SECTION C

END OF SECTION B